Ok..lets begin..!
Experiment
Shoe Box Potato MazeThis experiment requires a sturdy shoe box with a tight fitting lid.
You will also need a sprouting potato planted in a tea cup. Use toothpicks to hold the potato approximately one centimetre above the bottom of the tea cup and add water.
Try not to spill or splash water in the shoe box since water will eventually cause the cardboard to disintegrate.
Installing the light baffles
Open the box and install three light baffles as shown in the diagram to the left.
It is essential that these baffles be absolutely light-tight along all edges and against the lid when it is fitted. If the baffles are glued in place their edges should be light-sealed with a couple of layers of black duct tape.
Finally, cut a circular hole in the end of the box to admit light into the interior.
Installing the cover
It is important to prevent light from leaking over the top of the baffles where they come in contact with the lid. Two methods have proved useful.
- Cut a thin sheet of foam padding to fit exactly inside the lid.
- Cut three or four thickness of heavy felt to fit exactly inside the lid.
Running the experiment
If the box is properly assembled, the only opportunity for light to enter the box is through the hole in the end of the box. Covering the box (leaving the hole exposed) with a black cloth provides additional protection from the effects of unwanted light entering the box.
0 comments:
Post a Comment